TN-90 High-Precision VU Meter DB Sound Level Meter Backlight For Power Amplifier

Description

Description
TN-90 High-Precision VU Meter DB Sound Level Meter Backlight For Power Amplifier Tube Amplifier
Description:
It is equipped with a backlight plate, and white LED light source with homogenizing plate to evenly diffuse the light. The hollow dial has a pure black background. Green scale marks and characters are very beautiful after power on.
Appearance & structure:
1. Movable part, moving coil type
2. Appearance: check details below
3. Degree board: check details below
4. Pointer material: zinc-nickel alloy. Pointer color: orange. Pointer swing direction: from left to right. Pointer length: 44+1mm from the central axis to the needle end. Pointer width: 0.45±0.05mm
5. Electric setting direction: vertical
Electrical performance:
6. Standard test conditions: 20℃, humidity 70%. Test can also be carried out under normal temperature and humidity if there is no difference in the test results
7. Current sensitivity: The pointer is at the zero scale to the maximum scale (full scale position), the sensitivity is 960uA+8%
8. Internal impedance: 650Ω±10%
9. Insulation resistance: 500V DC plus 50M ohm or more for the outer box of the meter and the electrical circuit. The insulation resistance of the meter case and the electrical circuit is tested with a 500V DC voltage.
10. Zero position: The meter uses the standard posture. The front end of the pointer and the center of the zero scale are used as the reference. The overlap tolerance of the pointer and the zero scale is ±1mm.
11. Balance: The allowable error range of the meter is ±1mm when the standard position is tilted forward and backward by 90 degrees
12. Pointer sticking: instantaneously add the full-scale current three times the overcurrent, and slowly decrease to the reading of 1/2 of the current sensitivity, then the pointer will return to within 1/3 of the scale
13. Friction: When the electric current is applied to the electric meter, the error range of the indication point is ±1mm when it slowly increases or decreases to a certain value
14. Braking: Instantly add 2/3 of the current value of the scale plate, within one second from the beginning to the pointer indicating position
Special tests:
15. Overload test: Input ten times the full scale current every five seconds. This action is repeated nine times. Each time is 0.5 seconds. After this test, items 7-14 remain normal
16. Vibration test: After packaging, the meter will vibrate up and down 4mm 1,000 times per minute on the vibrating plate, 10 minutes in each direction. After this test, 7-14 items remain normal
17. Impact test: After the meter is packaged, it is dropped from a height of 30 cm on a 3cm thick wooden board, tested in X.Y.Z. three directions, and the 7-14 items remain normal after this test.
18. Reliability test: After 100,000 calibration point current input, the current sensitivity limit is still within the standard
19. Environmental impact test: 50℃, humidity 85%, lasting 100 hours. After this test, 7-14 items remain normal
20. Terminal pull test: The terminal must withstand a pull of 1 kg for 60 seconds without being affected
Others:
21. Operating temperature limit: -10℃ to＋60℃, RH 35% to 85%
22. Storage temperature limit: -20℃ to +60℃, RH 35% to 85% (Not place the meter under direct sunlight, and store the meter in a packing box to prevent objects from entering the inside of the meter)
23. Soldering conditions: Put the terminal about 3 mm into tin plate at 230℃ for 3.5 seconds. After this test, items 7-14 remain normal. Soldering temperature: Hold solder gun at 350℃, and touch the terminal for 3.5 seconds , the front end of the terminal is about 3mm in contact with the solder gun. After this test, 7-14 items remain normal
24. Anti-static: Use a dry nylon cloth to test three times in the same direction on the surface of the transparent cover. The difference of the pointer on the mark is less than 1/3 of the length of the scale, and it returns to the zero position after three seconds
25. Bulb specifications: two white LEDs 2.8-3.0V backlight board (voltage can be changed to 12V for free. If necessary, please contact us)
Package Included:
- 1 x Set of VU Meter
Note:
- Other items pictured are not included, for demonstration purposes only. Thank you for your understanding!
After connecting voltage divider resistor in series, the backlight voltage is changed to 12V, as shown in the figure:
Payment Terms
1.We accept PayPal only.
2.All major credit cards are accepted through secure payment processor PayPal.
3.Payment must be received within 7 business days of auction closing.
4.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
Shipping Terms
- For remote regions, we will charge your extra shipping costs. Usually it cost about 35USD-50USD. We will contact you after your payment. Thanks for your understanding.
Return Terms
1. If you receive defective item, please kindly notify us within 14 days. We will guide you the returning instruction for replacement or refund.
2. If you purchased in improper condition, please NOTE that the sipping and handling fee will not be refund, all return shipping fee should paid by the buyer unless item DOA.
3. We reserve the right to refuse any returns for objective reasons.
Custom Duties & Taxes
1. Import duties, taxes, and charges are not included in the item price or postage cost. These charges are the buyer's responsibility.
2. Avoiding some unnecessary trouble, please check with your country's customs office to inform us what we should declare its value before shipping.
Feedback
1. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
2. If you are satisfied with the product you received, please kindly leave us a positive feedback and 5 star DSR. If there is any problem of your order, please feel free to contact us firstly, we are responsible and credible seller, will follow it for you asap.
On Apr-05-21 at 20:22:31 PDT, seller added the following information: