Photography Set-top 35°-45°Reflection Light Meter Hot and Cold Shoe FOR ZB_M08

Description

Description:
Metering angle: approx. 45°Reflective Average Metering
Battery capacity: 300mAh
Charging specification: 5V/450mA
ISO range: ISO6~ISO6400
Aperture range: F1.0~F64
Shutter range: 4.0S~1/2000S
Working current: 8mA~10mA
Standby current: 3.5uA
Display mode: 0.96 inch 0LED
Power supply mode: lithium battery (can be used for about 28 hours of continuous metering)
Support metering while charging, you can also choose to shut down when charging
【Instructions for use】
1. After receiving the goods, it is recommended to fully charge it before using it.
2. Metering: Continuous metering starts when it is turned on, and stops metering when turned off.
3. There are three operation modes of the operation dial on the right rear side of the machine, press forward, press backward, and press inward (leftward).
4. Selection of priority mode: Operate the dial to go in (left) and click to modify the priority mode.
5. When the screen arrow points to the aperture value, it indicates the aperture priority mode. Press the dial forward or backward,
You can increase or decrease the value. Long press the dial forward or backward to quickly adjust the value.
6. The arrow on the screen points to the shutter time, indicating the shutter priority mode, and the dial can also adjust the value.
7. Press and hold the dial inward (leftward) for more than 1 second to set the sensitivity. At this time, the screen arrow points to ISO.
Press again to exit the sensitivity setting. When setting the sensitivity, the machine can also continuously meter light.
Package Included:
1 x Photography Set-top Reflection Light Meter
1 set Aessories(5V 1A charger,USB_A to Type_C charging cable)