NEWPORT INFP-0000-C2 6-DIGIT INFINITY® RED LED DISPLAY PROCESS METER

Description

NEWPORT INFP-0000-C2 6-DIGIT INFINITY® RED LED DISPLAY PROCESS METER
NEW OLD STOCK
LOT  30432  G120A
Product Overview
The INFP-0000-C2 is a 6-digit INFINITY® red LED display Process Meter with 4 to 20mA inputs and open collector outputs. The broad scaling capabilities make the INFP meter ideal for demanding process control applications. It is suited for even the most hostile environments with a gasketed front bezel and this meter offers on-board excitation to let you power virtually any sensor or transmitter. Four standard set-points give the flexibility to control or alarm the system completely. The meter offers scale and offset the input signal into any engineering units desired, plus selects a two-point data method of scale and offset that eliminates the signal errors transmitted from a sensor. You can capture and display peak and valley levels of the input signals, an important feature for such applications as destructive and pressure testing. The meter can be easily reconfigured using the front pushbuttons or via either of the optional serial communications boards.
Meter is delivered configured for the input type
Wide selection of DC voltage and current ranges
Large digital offset capabilities enabling easy scaling in engineering units
Smart filtering detects the difference between a spike or process change
Dual-slope technique conversion
Single-ended input configuration
Unipolar/bipolar, programmable polarity
Selectable decimal point and read rates of up to 13 readings/sec
High accuracy of ±0.005% of reading
±0.005% Rdg accuracy
50min Warm-up to rated accuracy
15-bit Resolution
0 to 50°C Operating temperature range
Applications
Industrial, Metering, Test & Measurement
Product Highlights
Red LEDs, 115 V ac, 50/60Hz
Standard four open-collector outputs
Isolated RS-485 Communications
6 Digit Display
Split Meter with Remote Display
Four Isolated Open Collector Outputs
Wide Selection of dc Voltage and Current Ranges
High Accuracy of ±0.005% of Reading
Large Digital Offset Capabilities Enabling Easy Scaling in Engineering Units
Smart Filtering Detects the Difference Between a Spike or Process Change (Patent Applied For)
Selectable Decimal Point and Read Rates of up to 13 Readings/Sec
Peak and Valley Detection and Memory
Configurable Via Front Pushbuttons or Via RS-232 or RS-485
Accuracy: ±0.005% rdg
Span Temperature Coefficient: ±20 ppm
Step Response: 1 sec to 99.9%
Warmup to Rated Accuracy: 50 min
Operating Ambient: 0 to 50°C (32 to 122°F), 95%RH, non-condensing
Storage Ambient: -40 to 85°C (-40 to 185°F)
Power: 115 or 230 Vac, 49-400 Hz; 10 to 32 Vdc
Power Consumption: 6 W nominal, 10 W max.
Normal Mode Rejection: 60 dB
Common Mode Rejection: 120 dB
Common Mode Voltage: 1500 V peak per Hv test
Resolution: 15-bit
Conversion: dual-slope technique
Reading Rate: 3/sec or 13/sec, 60 Hz; 3/sec or 12/sec, 50 Hz
Display: red or green 6-digit, 14-segment, 13.7 mm (0.54"); 4 alarm indicators
Dimensions: 48 H x 96 W x 165 D mm (1.89" x 3.78" x 6.5")
Panel Cutout: 45 H x 92 W mm (1.772" x 3.622"); 1/8 DIN
Weight: 574 g (1.27 lb)
TTL Outputs: four, isolated open collector; rated 150 mA at 1 V sink, 30 V open
Dual Relays: form C, 7 A at 30 Vdc or 230 Vac
BCD Output: isolated, tri-state, TTL/CMOS compatible; external 5 V supply for isolated; internal 5 V supply for non-isolated
Four Relay Option: dual 7A relays and dual 1 A relays
Analog Output: 0-5 V/1-5 V/0-10 V/0-20 mA/4-20 mA, user selectable; 354 Vp isolation; 14-bit resolution; 0.1% accuracy, 50 msec step response
RS-232 Communications: 300/600/1200/2400/4800/9600/19.2k baud; RJ11 4-wire connection; complete program setup and message display capability; programmable to transmit current display, alarm status, min/max, actual measured input value and status
RS-485 Communications: 300/600/1200/2400/4800/9600/19.2k baud; RJ12 6-wire connection; addressable from 0 to 199
Voltage Input Ranges: 0-100 mV, 0-1 V, 0-5 V, 1-5 V, 0-10 V, 0-100 V, ±50 mV, ±500 mV, ±5 V, ±50 V
Current Input Ranges: 0-20 mA, 4-20 mA
Input Configuration: single-ended
Polarity: unipolar/bipolar, programmable
Span Adjustment: +0.00001 to 500,000, programmable
Offset Adjustment: 0 to 999,999 or 0 to -99,999, programmable
Sensor Excitation: 24 V at 25 mA for loop power