Dynisco Model UPC660 UPC 660 Input Strain Gauge or Pressure Controller / Meter

Description

A Dynisco UPC660 or UPC 660 or UPC-660 Input Strain Gauge or Pressure Controller / Meter. Was in the spare parts inventory of a closed biz. Everything from there has been in working order. It has some masking tape
residue
on it. The info sticker says Action: PID, 120/240 VAC, Output 0/4-20 MA DC. (The camera flash washed out the writing on the tag/sticker, which is about the same color as the tag, making it hard to read.) These are listed at 0+ online, so I listed this one for way less.
Free & fast shipping in the US. Here's some specs I found
online
:         Also, the manual is readily available
online
as a .pdf.
UPC660
Model UPC660 pressure controller provides single loop pressure control for applications such as polymer extrusion. The 0 - 10 Vdc or 0 - 20 mA/4 - 20 mA control outputs are opto-isolated, and provide a 100 mS response time to meet the demands of rapidly changing processes. Dual programmable alarm relays can alert an operator or provide machine shut down in the event of an over-pressure or under-pressure condition. The dual LED displays show setpoint and process pressure and are capable of showing percent of power out or deviation from setpoint with the push of a key. Optional serial communications interface allows communication to a host computer for data logging or secondary control.
Fully adjustable PID control
350 ohm strain gage input
Selectable mA/Vdc control output
Programmable setpoint ramp
Auto/manual operation
Serial interface (optional)
Dual, programmable alarms
0 - 5 Vdc auxiliary output